#1
What is the recommended minimum following distance when driving on high-speed roadways?
1 second
2 seconds
3 seconds
4 seconds
#2
What does the term 'tailgating' refer to in the context of safe driving practices?
Following too closely behind another vehicle
Turning on the vehicle's tail lights
Driving in the rightmost lane
Using the vehicle's tailgate for communication
#3
What is the recommended action if you experience a tire blowout while driving on a high-speed roadway?
Brake hard to come to a stop immediately
Steer firmly and gradually release the accelerator
Accelerate to maintain control
Ignore it and continue driving
#4
What is the purpose of the 'diamond' or 'shark's teeth' road markings on high-speed roadways?
To indicate the presence of a wildlife crossing
To mark the location of a hidden speed bump
To indicate that overtaking is allowed
To signal a pedestrian crossing
#5
What does the term 'hydroplaning' refer to in the context of high-speed driving and wet road conditions?
Driving with headlights off in the rain
The sudden loss of traction due to a layer of water between the tires and the road surface
Using water as a substitute for windshield washer fluid
Performing water stunts on the roadway
#6
Which of the following factors is crucial for maintaining control of your vehicle at high speeds?
Underinflated tires
Excessive speed
Regular maintenance
Properly inflated tires
#7
When entering a high-speed roadway, what is the best way to merge with traffic?
Merge as quickly as possible
Use your horn to alert other drivers
Wait for a large gap in traffic before merging
Drive in the emergency lane until you find a gap
#8
In adverse weather conditions on high-speed roadways, what should drivers do to maintain safety?
Increase speed to reach the destination faster
Turn on hazard lights continuously
Reduce speed and increase following distance
Switch off headlights to avoid glare
#9
What is the purpose of rumble strips on the edge of a high-speed roadway?
To provide a smooth surface for driving
To alert drivers with a vibration and sound if they drift off the road
To mark parking spaces
To indicate the presence of a toll booth
#10
When driving on high-speed roadways, what is the purpose of the 'No-Zone' areas around large commercial vehicles?
Safe areas for overtaking
Areas where the driver has full visibility
Blind spots where the driver cannot see other vehicles
Parking zones for large vehicles
#11
What is the primary function of the Anti-lock Braking System (ABS) in a vehicle when driving at high speeds?
To increase fuel efficiency
To prevent skidding and maintain steering control during hard braking
To deactivate brakes on command
To reduce engine power
#12
What is the primary purpose of the acceleration lane on a high-speed roadway entrance?
To decelerate and exit the roadway
To merge smoothly with existing traffic
To stop and check traffic conditions
To park temporarily
#13
When driving at high speeds, what should you do if your vehicle starts to skid?
Brake firmly to stop the skid
Steer in the opposite direction of the skid
Accelerate to regain control
Turn the steering wheel in the direction of the skid
#14
When approaching a work zone on a high-speed roadway, what precaution should drivers take?
Increase speed to pass through quickly
Ignore warning signs and continue at normal speed
Follow the posted speed limits and be alert for changes
Honk the horn to alert workers
#15
What is the purpose of the 'Move Over' law on high-speed roadways?
To encourage drivers to change lanes frequently
To require drivers to slow down when passing emergency vehicles
To promote lane hogging
To discourage drivers from using turn signals
#16
When entering a high-speed roadway, why is it essential to adjust your speed to match the flow of traffic?
To show off your driving skills
To avoid using the accelerator
To reduce fuel consumption
To enhance traffic flow and safety
#17
In the context of high-speed driving, what is the purpose of the 'two-second rule' for following distance?
To calculate the time needed for overtaking
To maintain a safe distance from the vehicle ahead
To determine the duration of traffic signals
To measure the time for completing a lane change