#1
Which tool is commonly used for forcible entry during firefighting?
Crowbar
ExplanationCommon tool for breaking into structures during firefighting.
#2
What does the acronym 'SCBA' stand for in firefighting?
Self-Contained Breathing Apparatus
ExplanationEquipment providing breathable air independent of external sources.
#3
What is the primary purpose of a pike pole in firefighting?
For pulling ceiling and walls
ExplanationUtilized for pulling down ceilings and walls during firefighting.
#4
What does the acronym 'HAZMAT' stand for in firefighting?
Hazardous Materials Response
ExplanationResponse to incidents involving hazardous materials.
#5
What is the primary purpose of a flathead axe in firefighting?
For forcible entry
ExplanationTool used primarily for breaking into structures.
#6
Which tool is commonly used for prying open doors during firefighting operations?
Halligan tool
ExplanationCommonly used tool for prying open doors in firefighting.
#7
What is the primary purpose of a Halligan tool in firefighting?
For prying and breaching
ExplanationUsed primarily for prying and breaching obstacles in firefighting.
#8
Which technique involves breaking a window to create ventilation in a structure fire?
Vertical ventilation
ExplanationMethod of creating ventilation by breaking windows upwards.
#9
In ladder operations, what does 'flaking' refer to?
Extending the ladder
ExplanationProcess of extending a ladder during operations.
#10
What is the purpose of a K-tool in firefighting?
For prying open doors
ExplanationDesigned to assist in prying open doors during firefighting.
#11
Which technique involves cutting a hole in the roof of a structure fire to release heat and smoke?
Vertical ventilation
ExplanationMethod of releasing heat and smoke by cutting holes in the roof.
#12
What is the purpose of a rabbit tool in firefighting?
For prying open doors
ExplanationTool designed for forcing entry by prying open doors.
#13
Which tool is used for cutting through metal bars or locks during firefighting?
Bolt cutter
ExplanationTool specifically designed for cutting metal bars or locks.
#14
In ladder rescue operations, what does 'two-point contact' refer to?
Keeping both feet and one hand on the ladder
ExplanationSafety measure of maintaining contact with ladder for stability.
#15
In ladder operations, what does 'butt spiking' refer to?
Positioning the bottom of the ladder against the building
ExplanationMethod of securing the base of the ladder against the building.
#16
What is the primary purpose of a set of irons in firefighting?
Forcible entry
ExplanationTools used primarily for breaking into structures.
#17
What does the acronym 'PASS' stand for in relation to fire extinguisher use?
Pull, Aim, Squeeze, Sweep
ExplanationProcedure for using a fire extinguisher: Pull the pin, Aim at the base of the fire, Squeeze the handle, Sweep from side to side.